№ 2 (16) – 2021 

 

 

USE OF 3D PRINTING MATERIALS FOR THE MANUFACTURE OF UNMANNED AERIAL VEHICLES

https://doi.org/10.37129/2313-7509.2021.16.66-73
 
 завантаження V. Bachynskyi, Cand. of Technical Sciences, Senior Research Scientist
                                                        
 завантаження Yu. Kliat, Cand. of Technical Sciences
 
 завантаження O. Shkurpit
 завантаження O. Kondratenko
 

FULL TEXT: PDF (in Ukrainian)

 

Cite in the List of bibliographic references (DSTU 8302:2015)

Бачинський В. В., Клят Ю. О., Шкурпіт О. М., Кондратенко О. І. Використання матеріалів 3D друку для виробництва безпілотних літальних апаратівЗбірник наукових праць Військової академії (м. Одеса). 2021. Вип. 2(16). С. 66-73. https://doi.org/10.37129/2313-7509.2021.16.66-73 

 

Abstract

The article presents an analysis of the use of materials for the production of unmanned aerial vehicles (UAVs), developed using additive technologies (AT). The samples of materials mentioned in the article have the prospect of becoming advanced in modern UAVs production. The main factors that affect the properties of the printed material with the help of AT are also identified.
Today, the production of materials for the manufacture of UAVs is developing rapidly, becoming more technological; production volumes are increasing, accuracy and quality of manufacturing parts are increasing with reduced costs. Additive technologies are ideal for the manufacture, printing, repair and modification of modern UAVs. Many parts for UAVs can be printed on a 3D printer. The use of AT is clearly demonstrated to optimize the production of UAV parts. In the case of the usual method of production of UAVs, their cost and complexity is quite high. The introduction of AT allows to significantly reduce the weight of the UAV components by reducing material costs.
Studies have shown that the use of AT in the production of UAVs at the present stage will provide an opportunity to increase the aerodynamic characteristics of UAVs, reduce overall weight, and will allow the collection and repair of UAVs in the field. AT will also ensure the production of replacement parts that are needed in small volumes and that cannot be manufactured using traditional production technologies in the field.
Thus, the introduction of AT will lead to a change in existing principles of design of printing technologies, the application of new approaches in the construction of modern 3D printers, the emergence of new, related to 3D printing technologies. That’s why the study of factors that affect the properties of the printed material of UAVs is highly relevant task and needs further research.

Keywords

additive technologies, UAV, 3D printing.
 

List of bibliographic references

  1. Еремин Г. В., Гаврилов А. Д., Назарчук И. И. Малоразмерные беспилотники – новая проблема для ПВО. Армейский вестник. URL: https://army-news.org/2015/02/malorazmernye-bespilotniki-novaya-problema-dlya-pvo/ (дата звернення: 20.09.2021).
  2. World’s largest 3D metal printers. Rockets built and flown in days. Relativity Space. URL: https://www.relativityspace.com/stargate/ (date of access: 20.09.2021).
  3. Вус Е. В «Укроборонпроме» представили первый украинский военный квадрокоптер: видео. Сегодня. URL: https://ukraine.segodnya.ua/ukraine/v-ukroboronprome-predstavili-pervyy-ukrainskiy-voennyy-kvadrokopter-video-1391008.html (дата звернення: 20.09.2021).
  4. Base defence demonstration at Trident Juncture 2018 – TACT unmanned systems for base and force protection. Norwegian Defence Research Establishment. URL: https://www.ffi.no/en/publications-archive/base-defence-demonstration-at-trident-juncture-2018-tact-unmanned-systems-for-base-and-force-protection (date of access: 20.09.2021).
  5. MakerBot Thingiverse. URL: https://www.thingiverse.com/ (дата звернення: 20.09.2021).
  6. Гибсон Я., Розен Д., Стакер Б. Технологии аддитивного производства / пер. с англ., под ред. И. В.  Шишковский. Москва : Техносфера, 2016. 646 с.
 

References

  1. Eremin, G. V., Gavrilov, A. D., Nazarchuk, I .I. (2015). Small drones - a new problem for air defense. Retrieved from https://army-news.org/2015/02/malorazmernye-bespilotniki-novaya-problema-dlya-pvo/ (Last accessed: 20.09.2021) [in Russian].
  2. World’s largest 3D metal printers. Rockets built and flown in days. (n. d.). Relativity Space. Retrieved from https://www.relativityspace.com/stargate/ (Last accessed: 20.09.2021) [in English].
  3. Vus, E. (2020). Ukroboronprom presented the first Ukrainian military quadcopter: video. Segodnya. Retrieved from https://ukraine.segodnya.ua/ukraine/v-ukroboronprome-predstavili-pervyy-ukrainskiy-voennyy-kvadrokopter-video-1391008.html (Last accessed: 20.09.2021) [in Ukrainian].
  4. Base defence demonstration at Trident Juncture 2018 – TACT unmanned systems for base and force protection. (2019). Norwegian Defence Research Establishment. Retrieved from https://www.ffi.no/en/publications-archive/base-defence-demonstration-at-trident-juncture-2018-tact-unmanned-systems-for-base-and-force-protection (Last accessed: 20.09.2021) [in English].
  5. MakerBot Thingiverse. Retrieved from https://www.thingiverse.com/ (Last accessed: 20.09.2021) [in English].
  6. Gibson, YA., Rozen, D., Staker, B., Shishkovskogo,I. V. (Ed.). (2016). Additive Manufacturing Technologies. (I. V.Shishkovskogo, Trans.). Moskva : Tekhnosfera [in Russian].

  

Copyright 2014 16.66-73 (eng) А. Розроблено ІОЦ ВА
Templates Joomla 1.7 by Wordpress themes free